Iron vs. Aluminum Die Casting: Why Choose Aluminum?
Introduction When it comes to manufacturing high-quality components, die casting is one of the most reliable methods used across industries. This process enables the mass production of precision parts with excellent surface finishes. Although materials like iron and aluminum are commonly used for die casting, choosing the right one can greatly impact performance, costs, and […]
Die casting skinning defect causes and prevention countermeasures
1. Introduction Die casting factory in the die casting shot blasting treatment after the skinning is a common phenomenon, is determined by the die casting process characteristics. Through research and practice, high speed starting point appropriate forward, elevate the mold temperature, be covered mold surface, as well as reasonable arrangement of pouring system and other […]
How to improve the die casting processing appear die casting gas shrinkage hole problem
1. Introduction The improvement of air shrinkage hole research has important theoretical value and practical significance, for promoting the progress of casting technology and the development of die casting industry is of great significance. Die casting gas shrinkage hole phenomenon is die casting production process common quality defects, serious will lead to die casting scrap, […]
Application of orthopedic process for deformation thermal stress in aluminum alloy thin-walled die castings
Introdution With the continuous development of the casting industry, there are many advanced die-casting technology to improve the aluminum alloy process performance. Below to automobile power generator thin wall cover parts as an example, analysis of aluminum alloy throughout the die casting production process deformation thermal stress factors and share with you a set of […]
Influence of partial coating process of die casting mold on the quality of die castings
Introduction With the development of technology, the quality of die casting more and more high requirements, not only on its mechanical properties, internal organization has strict requirements, the appearance of defects also put forward more stringent requirements. Such as aluminum alloy die casting in the casting process, often appear sintering sticky aluminum, pulling and casting […]
Vacuum applications for copper die casting
1. Introduction: Die casting alloys include the commonly used aluminum, magnesium, zinc, and copper alloys, as well as the earlier tin and lead, and the less commonly used steel and iron. Pure copper is very difficult to cast, and its products are prone to surface cracking, porosity problems, and the formation of internal cavities. General […]
How does vacuum technology improve die casting quality?
In the die casting production process, the improvement and optimization of the die casting process to improve the quality of die casting has played a significant role in promoting; this article briefly describes the die casting technological innovation and how product quality continues to improve, its various aspects of the characteristics of the increasing attention. […]
What is the local extrusion process in high pressure casting?
1. introduction In this article, for the high-pressure casting process of local thick parts prone to porosity and shrinkage, for porosity, shrinkage of the reasons for the analysis, the principle and structure of local extrusion, as well as local extrusion of the process of the main parameters: extrusion depth, extrusion pressure, extrusion delay time, extrusion […]
Die Casting Porosity Analysis and Solutions
I.Introduction With the rapid development of the automobile industry and the requirements of automobile lightweight, aluminum, magnesium, and other alloy die-casting parts increased significantly, providing a broad prospect for the further development of the die-casting industry. Due to the lightweight demand of parts, the alloy material performance, product structure, and process design and control requirements […]